Hubssense
Helsevesen Bath Lift Chair - Reclining Bath Lift for Elderly with Transfer Board & Rotary Disk | Waterproof Remote Control
Helsevesen Bath Lift Chair - Reclining Bath Lift for Elderly with Transfer Board & Rotary Disk | Waterproof Remote Control
Couldn't load pickup availability
- Alloy Steel
- The Bath Lift Chair with a maximum weight capacity of 22st/300lb(140kg), with a roomy seat size of 28 inches (70cm) when the side flaps are extended, offers a comfortable place to relax. The backrest of the Bath Lift Chair reclines 45 degrees, so you can bathe in comfort
- This ultra-modern bath lift offers one of the lowest heights in the electric bath lift market, allowing you to sit as low as 8cm from the base of the tub. Those impressive specifications are complemented by a really convenient build. The lightweight material helps you to lift the Bath Lift Chair in and out of the tub with ease, and it can be easily collapsed for discreet storage when the bath lift chair is not in use
- Design of high waterproof performance with a simple 3-button control handset, while the high-capacity lithium battery needs just 2 and a half hours to get a full charge in the handset ready for you to relax and bathe again
- Helsevesen Bath Lift Chair, an incredibly lightweight bathing aid with reliably strong and stable construction, gives you back your independence and your privacy in the bathroom
- Service offered: Please let us know if you have any questions. We would like to help
Helsevesen Bath Lift
Helsevesen Bath Lift is built with lightweight plastic. This makes our product easy to transport and stow away and ideally suit for use in the home or away. The lithium-ion battery is located in the hand control. The hand control itself can float in the water
The drive motor and control electronics are completely water tight, so you can use even with the shower on. The sturdy frame dismantles, enabling the seat to be raised or lowered from 8 cm to 48 cm (2.3 to 19.5in) height
The lifting rod lifts and lowers the seat surface when the user pushes the up and down buttons. The drive unit with an integrated backrest can be folded down for removal and automatically locks into the seat base when the lift is raised. This prevents unintentional tilting of the backrest. Intelligent power control ensures that the lift can only be lowered if sufficient power is available to raise it again
Seat plate with hole drainage can be installed in left and rightpositions. PE blow molding, anti-leather Pu, self-cleaning leather.
Folding design. 10-Gear height adjustable.
High-strength Steel With Better Stability and Support.
TIPS
Ensure the six suckers are well in shipping, if not, please tighten it up
Ensure there are no obstacles(such as shower head, tap, pipe fitting, etc.) in the bathtub to prevent the bath chair from lifting up and down normally
Confirm the bathtub is meet the relevant standard
Please put the bath lift into the bathtub. If difficult, please look for somebody to help
Please ensure the ground is dry and no obstacles to prevent some accidents while moving the bath chair
Please ensure there is enough space at the back of the bath chair in the bathtub
Ensure six suckers are well connected with the surface of the bottom bathtub
Ensure the male plug of the bath lift and female plug of the handset are totally dry, then connect
Put the wire of the handset out of the bath lift, in order to prevent it from damaged or bad connected
